Discovery of a novel flavonol O-methyltransferase possessing sequential 4'- and 7-O-methyltransferase activity from Camptotheca acuminata Decne.

The biosynthetic route for flavonol in Camptotheca acuminata has been recently elucidated from a chemical point of view. However, the genes involved in flavonol methylation remain unclear. It is a critical step for fully uncovering the flavonol metabolism in this ancient plant. In this study, the multi-omics resource of this plant was utilized to perform flavonol O-methyltransferase-oriented mining and screening. Two genes, CaFOMT1 and CaFOMT2 are identified, and their recombinant CaFOMT proteins are purified to homogeneity. CaFOMT1 exhibits strict substrate and catalytic position specificity for quercetin, and selectively methylates only the 4'-OH group. CaFOMT2 possesses sequential O-methyltransferase activity for the 4'-OH and 7-OH of quercetin. These CaFOMT genes are enriched in the leaf and root tissues. The catalytic dyad and critical substrate-binding sites of the CaFOMTs are determined by molecular docking and further verified through site-mutation experiments. PHE181 and MET185 are designated as the critical sites for flavonol substrate selectivity. Genomic environment analysis indicates that CaFOMTs evolved independently and that their ancestral genes are different from that of the known Ca10OMT. This study provides molecular insights into the substrate-binding pockets of two new CaFOMTs responsible for flavonol metabolism in C. acuminata.

Ball-milled zero-valent iron with formic acid for effectively removing Cu(II)-EDTA accomplished by EDTA ligands oxidative degradation and Cu(II) removal.

Heavy metal complexes in industrial wastewater are challenging to be removed by conventional methods arising from their stable chelating structure. In this study, zero-valent iron (ZVI) was ball-milled with tiny formic acid (FA), and the as-prepared sample (FA-ZVIbm) was attempted to eliminate a model heavy metal complex of Cu(II)-ethylenediaminetetraacetic acid (Cu(II)-EDTA). The addition of FA to ball-milling could dramatically enhance the performance of ball-milled ZVI (ZVIbm) towards Cu(II)-EDTA removal and increase the removal rate constant by 80 times. This conspicuous improvement of Cu(II)-EDTA elimination was attributed to the ferrous formate (Fe(HCOO)2) shell formed on the surface of FA-ZVIbm. Results revealed that the Fe(HCOO)2 shell facilitated the activation of O2 to reactive oxygen species (ROS) and the leaching of Fe3+. Cu(II)-EDTA was decomplexed through both oxidative destruction and Fe3+ replacement, and the released Cu2+ was reduced by FA-ZVIbm and immobilized synchronously. Meanwhile, the ligands underwent oxidative degradation by ROS, thus avoiding the re-chelation ecological risk. Impressively, FA-ZVIbm could achieve cyclic treatment of actual copper complex wastewater and possessed promising advantage in treatment cost. This study would offer a promising approach for eliminating Cu(II)-EDTA through EDTA ligands degradation and synchronous Cu(II) removal, moreover to shed light on the decomplexation mechanism.

Triangle Cl-Ag1 -Cl Sites for Superior Photocatalytic Molecular Oxygen Activation and NO Oxidation of BiOCl.

BiOCl photocatalysis shows great promise for molecular oxygen activation and NO oxidation, but its selective transformation of NO to immobilized nitrate without toxic NO2 emission is still a great challenge, because of uncontrollable reaction intermediates and pathways. In this study, we demonstrate that the introduction of triangle Cl-Ag1 -Cl sites on a Cl-terminated, (001) facet-exposed BiOCl can selectively promote one-electron activation of reactant molecular oxygen to intermediate superoxide radicals (⋅O2 - ), and also shift the adsorption configuration of product NO3 - from the weak monodentate binding mode to a strong bidentate mode to avoid unfavorable photolysis. By simultaneously tuning intermediates and products, the Cl-Ag1 -Cl-landen BiOCl achieved >90 % NO conversion to favorable NO3 - of high selectivity (>97 %) in 10 min under visible light, with the undesired NO2 concentration below 20 ppb. Both the activity and the selectivity of Cl-Ag1 -Cl sites surpass those of BiOCl surface sites (38 % NO conversion, 67 % NO3 - selectivity) or control O-Ag1 -O sites on a benchmark photocatalyst P25 (67 % NO conversion and 87 % NO3 - selectivity). This study develops new single-atom sites for the performance enhancement of semiconductor photocatalysts, and also provides a facile pathway to manipulate the reactive oxygen species production for efficient pollutant removal.

Surface oxygen vacancy-dependent molecular oxygen activation for propane combustion over α-MnO2.

Oxygen vacancies (OV), as the sites of molecular oxygen adsorption and activation, play an important role in the catalytic combustion process of volatile organic compounds (VOCs). Revealing the relationship between OV concentration and molecular oxygen activation behavior is of significance to construct the efficient catalysts. Herein, α-MnO2 with different OV concentrations was prepared to investigate the molecular oxygen activation for C3H8 combustion. It is disclosed that the enhanced OV concentration in α-MnO2 induced the reconfiguration of surface metal atoms, resulting in the transformation of oxygen activation configuration from end-on mode to side-on mode. Oxygen molecules in side-on mode possessed more localized electron density and weaker coordination bond strength with surrounding Mn atoms, which were more favorable to adsorb C3H8 molecules and activate C-H bond for the improved combustion performance. This work provides a new understanding to reveal that the increased OV concentration contributes to more efficient VOCs combustion.

Highly selective synthesis of surface FeIV=O with nanoscale zero-valent iron and chlorite for efficient oxygen transfer reactions.

High-valent iron-oxo species (FeIV=O) has been a long-sought-after oxygen transfer reagent in biological and catalytic chemistry but suffers from a giant challenge in its gentle and selective synthesis. Herein, we propose a new strategy to synthesize surface FeIV=O (≡FeIV=O) on nanoscale zero-valent iron (nZVI) using chlorite (ClO2-) as the oxidant, which possesses an impressive ≡FeIV=O selectivity of 99%. ≡FeIV=O can be energetically formed from the ferrous (FeII) sites on nZVI through heterolytic Cl-O bond dissociation of ClO2- via a synergistic effect between electron-donating surface ≡FeII and proximal electron-withdrawing H2O, where H2O serves as a hydrogen-bond donor to the terminal O atom of the adsorbed ClO2- thereby prompting the polarization and cleavage of Cl-O bond for the oxidation of ≡FeII toward the final formation of ≡FeIV=O. With methyl phenyl sulfoxide (PMS16O) as the probe molecule, the isotopic labeling experiment manifests an exclusive 18O transfer from Cl18O2- to PMS16O18O mediated by ≡FeIV=18O. We then showcase the versatility of ≡FeIV=O as the oxygen transfer reagent in activating the C-H bond of methane for methanol production and facilitating selective triphenylphosphine oxide synthesis with triphenylphosphine. We believe that this new ≡FeIV=O synthesis strategy possesses great potential to drive oxygen transfer for efficient high-value-added chemical synthesis.

Discovery of unique CYP716C oxidase involved in pentacyclic triterpene biosynthesis from Camptotheca acuminata.

Dozens of triterpenes have been isolated from Camptotheca acuminata, however, triterpene metabolism in this plant remains poorly understood. The common C28 carboxy located in the oleanane-type and ursane-type triterpenes indicates the existence of a functionally active triterpene, C28 oxidase, in this plant. Thorough mining and screening of the CYP716 genes were initiated using the multi-omics database for C. acuminata. Two CYP716A (CYP716A394 and CYP716A395) and three CYP716C (CYP716C80-CYP716C82) were identified based on conserved domain analyses and hierarchical cluster analyses. CYP716 microsomal proteins were prepared and their enzymatic activities were evaluated in vitro. The CYP716 classified into the CYP716C subfamily displays ß-amyrin oxidation activity, and CYP716A displays α-amyrin and lupeol oxidation activity, based on gas chromatography-mass spectrometry analyses. The oxidation products were determined based on their mass and nuclear magnetic resonance spectrums. The optimum reaction conditions and kinetic parameters for CYP716C were determined, and functions were verified in Nicotiana benthaminana. Relative quantitative analyses revealed that these CYP716C genes were enriched in the leaves of C. acuminata plantlets after 60 d. These results indicate that CYP716C plays a dominant role in oleanane-type triterpene metabolism in the leaves of C. acuminata via a substrate-specific manner, and CYP716A is responsible for ursane- and lupane-type triterpene metabolism in fruit. This study provides valuable insights into the unique CYP716C-mediated oxidation step of pentacyclic triterpene biosynthesis in C. acuminata.

Oxalate-Promoted SO2 Uptake and Oxidation on Iron Minerals: Implications for Secondary Sulfate Aerosol Formation.

Mineral dust serves as a significant source of sulfate aerosols by mediating heterogeneous sulfur dioxide (SO2) oxidation in the atmosphere. Given that a considerable proportion of small organic acids are deposited onto mineral dust via long-range transportation, understanding their impact on atmospheric SO2 transformation and sulfate formation is of great importance. This study investigates the effect of oxalate on heterogeneous SO2 uptake and oxidation phenomenon by in situ FTIR, theoretical calculation, and continuous stream experiments, exploiting hematite (Fe2O3) as an environmental indicator. The results highlight the critical role of naturally deposited oxalate in mononuclear monodentate coordinating surface Fe atoms of Fe2O3 that enhances the activation of O2 for oxidizing SO2 into sulfate. Meanwhile, oxalate increases the hygroscopicity of Fe2O3, facilitating H2O dissociation into reactive hydroxyl groups and further augmenting the SO2 uptake capacity of Fe2O3. More importantly, other conventional iron minerals, such as goethite and magnetite, as well as authentic iron-containing mineral dust, exhibit similar oxalate-promoted sulfate accumulation behaviors. Our findings suggest that oxalate-assisted SO2 oxidation on iron minerals is one of the important contributors to secondary sulfate aerosols, especially during the nighttime with high relative humidity.

Electrochemical removal of gaseous benzene using a flow-through reactor with efficient and ultra-stable titanium suboxide/titanium-foam anode at ambient temperature.

Catalytic oxidation technology is currently considered as a feasible approach to degrade and mineralize volatile organic compounds (VOCs). However, it is still challenging to realize efficient removal of VOCs through catalytic oxidation at room temperature. In our study, a novel flow-through electrocatalytic reactor was designed, composed of porous solid-electrolyte, gas-permeable titanium sub-oxides/titanium-foam (TiSO/Ti-foam) as anode and platinum coated titanium foam (Pt/Ti-foam) as cathode. This device could oxidize nearly 100% of benzene (10 ppm) to carbon dioxide at a current density of 1.2 mA/cm2 under room temperature. More importantly, the device maintained excellent stability over 1000 h. Mechanism of benzene mineralization was discussed. Hydroxyl radicals generated on the TiSO/Ti-foam anode played a crucial role in the oxidation of benzene. This study provides a promising prototype of the electrochemical air purifier, and may find its application in domestic and industrial air pollution control.

Oxalated zero valent iron enables highly efficient heterogeneous Fenton reaction by self-adapting pH and accelerating proton cycle.

Heterogeneous Fenton reactions of zero-valent iron (ZVI) requires the sufficient release of Fe(II) to catalyze the H2O2 decomposition. However, the rate-limiting step of proton transfer through the passivation layer of ZVI restricted the Fe(II) release via Fe0 core corrosion. Herein we modified the shell of ZVI with highly proton-conductive FeC2O4·2H2O by ball-milling (OA-ZVIbm), and demonstrated its high heterogeneous Fenton performance of thiamphenicol (TAP) removal, with 500 times enhancement of the rate constant. More importantly, the OA-ZVIbm/H2O2 showed little attenuation of the Fenton activity during 13 successive cycles, and was applicable across a wide pH range of 3.5-9.5. Interestingly, the OA-ZVIbm/H2O2 reaction showed pH self-adapting ability, which initially reduced and then sustained the solution pH in the range of 3.5-5.2. The abundant intrinsic surface Fe(II) of OA-ZVIbm (45.54% vs. 27.52% in ZVIbm, according to Fe 2p XPS profiles) was oxidized by H2O2 and hydrolyzed to generate protons, and the FeC2O4·2H2O shell favored the fast transfer of protons to inner Fe0, therefore, the consumption-regeneration cycle of protons were accelerated to drove the production of Fe(II) for Fenton reactions, demonstrated by the more prominent H2 evolution and nearly 100% H2O2 decomposition by OA-ZVIbm. Furthermore, the FeC2O4·2H2O shell was stable and slightly decreased from 1.9% to 1.7% after the Fenton reaction. This study clarified the significance of proton transfer on the reactivity of ZVI, and provided an efficient strategy to achieve the highly efficient and robust heterogeneous Fenton reaction of ZVI for pollution control.

Pyrolysis temperature-switchable Fe-N sites in pharmaceutical sludge biochar toward peroxymonosulfate activation for efficient pollutants degradation.

Pyrolysis of pharmaceutical sludge (PS) is a promising way of safe disposal and to recover energy and resources from waste. The resulting PS biochar (PSBC) is often used as adsorbent, but has seldom been explored as catalyst. Herein we demonstrate that PSBC (0.4 g/L) could efficiently activate peroxymonosulfate (PMS) to 100% degrade 4-chlorophenol (4-CP) with rate constants of 0.42-1.70 min-1, outperforming other reported catalysts. Interestingly, the PMS activation pathway highly depended on PSBC pyrolysis temperature, which produced dominantly high-valent iron species (e.g., FeIVO2+) at low temperature but more sulfate radical (SO4·-) and hydroxyl radical (·OH) at higher temperature, e.g., 0.17, 0.23, 0.12 mmol/L of FeIVO2+ and 0.009, 0.038, 0.102 mmol/L of SO4·-/·OH were produced within 10 min by PSBC-600/PMS, PSBC-800/PMS, and PSBC-1000/PMS, respectively. Characterization, density functional theory (DFT) simulation and Pearson correlation analysis revealed that along with the increase of pyrolysis temperatures, the active sites of PSBC gradually shifted from atomically dispersed N-coordinated Fe moieties (FeNx) to iron nitrides (FexN), which activated PMS to produce FeIVO2+ and SO4·-/·OH, respectively. This study clarifies the structure-activity relationships of PSBC for PMS activation, and opens a new avenue for the treatment and utilization of PS as high value-added resources.

Nitrate promoted defluorination of perfluorooctanoic acid in UV/sulfite system: Coupling hydrated electron/reactive nitrogen species-mediated reduction and oxidation.

A significantly accelerated defluorination of recalcitrant perfluorooctanoic acid (PFOA) was explored with the co-present nitrate (20 mg L-1) by UV/sulfite treatment (UV/sulfite-nitrate). The deep defluorination of PFOA and complete denitrification of nitrate were simultaneously achieved in UV/sulfite-nitrate system. At the initial 30 min, PFOA defluorination exhibited an induction period, exactly corresponding to the removal of the co-existed nitrate. Upon the induction period passed, an accelerated removal of PFOA (5 mg L-1) occurred, nearly 100% defluorination ratio reached within 2 h. Compared with those in UV/sulfite, the kinetics of PFOA decay, defluorination, and transformation product formations were greatly enhanced in UV/sulfite-nitrate system. Reactive nitrogen species (RNS) generated from eaq--induced reduction of nitrate were found to play significant roles on the promoted defluorination apart from eaq--mediated reductive defluorination. The investigations on solution pH (7.0-11.0) confirmed that the reductive defluorination of PFOA was more efficient under alkaline conditions, however, the presence of nitrate can promote the defluorination even under neutral pH. Theoretical calculations of Fukui function demonstrated that RNS could easily launch electrophilic attack toward H-rich moieties of fluorotelomer carboxylates (FTCAs, CnF2n+1-(CH2)m-COO-), more persistent intermediates (formed via H/F exchange), and convert FTCAs into shorter-chain perfluorinated carboxylic acids, thus facilitating the deep defluorination. Along with the analysis on the denitrification products, the liberation of fluoride ions and generated intermediates, possible decomposition pathways were proposed. This work highlights the indispensable synergy from eaq-/RNS with integrated reduction and oxidation on PFOA defluorination and will advance remediation technologies of perfluorinated compound contaminated water.

Surface Boronizing Can Weaken the Excitonic Effects of BiOBr Nanosheets for Efficient O2 Activation and Selective NO Oxidation under Visible Light Irradiation.

The photocatalytic O2 activation for pollutant removal highly depends on the controlled generation of desired reactive oxygen species (ROS). Herein, we demonstrate that the robust excitonic effect of BiOBr nanosheets, which is prototypical for singlet oxygen (1O2) production to partially oxidize NO into a more toxic intermediate NO2, can be weakened by surface boronizing via inducing a staggered band alignment from the surface to the bulk and simultaneously generating more surface oxygen vacancy (VO). The staggered band alignment destabilizes excitons and facilitates their dissociation into charge carriers, while surface VO traps electrons and efficiently activates O2 into a superoxide radical (•O2-) via a one-electron-transfer pathway. Different from 1O2, •O2- enables the complete oxidation of NO into nitrate with high selectivity that is more desirable for safe indoor NO remediation under visible light irradiation. This study provides a facile excitonic effect manipulating method for layered two-dimensional photocatalysts and sheds light on the importance of managing ROS production for efficient pollutant removal.

An Electrochemical Strategy for Simultaneous Heavy Metal Complexes Wastewater Treatment and Resource Recovery.

Heavy metals chelated with coexisting organic ligands in wastewater impose severe risks to public health and the ambient ecosystem but are also valuable metal resources. For sustainable development goals, the treatment of heavy metal complexes wastewater requires simultaneous metal-organic bond destruction and metal resource recovery. In this study, we demonstrated that a neutral pH electro-Fenton (EF) system, which was composed of an iron anode, carbon cloth cathode, and sodium tetrapolyphosphate electrolyte (Na6TPP), could induce a successive single-electron activation pathway of molecular oxygen due to the formation of Fe(II)-TPP complexes. The boosted •OH generation in the Na6TPP-EF process could decomplex 99.9% of copper ethylene diamine tetraacetate within 8 h; meanwhile, the released Cu ions were in situ deposited on the carbon cloth cathode in the form of Cu nanoparticles with a high energy efficiency of 2.45 g kWh-1. Impressively, the recovered Cu nanoparticles were of purity over 95.0%. More importantly, this neutral EF strategy could realize the simultaneous removal of Cu, Ni, and Cr complexes from real electroplating effluents. This study provides a promising neutral EF system for simultaneous heavy metal complexes wastewater treatment and resource recovery and sheds light on the importance of molecular oxygen activation in the field of pollutant control.

A controllable reduction-oxidation coupling process for chloronitrobenzenes remediation: From lab to field trial.

Chloronitrobenzenes (CNBs) are typical refractory aromatic pollutants. The reduction products of CNBs often possess higher toxicity, and the electron-withdrawing substituent groups are detrimental to the ring-opening during the oxidation treatment, leading to ineffective removal of CNBs by either reduction or oxidation technology. Herein we demonstrate a controllable reduction-oxidation coupling (ROC) process composed of zero-valent iron (ZVI) and H2O2 for the effective removal of CNBs from both water and soil. In water, ZVI first reduced p-CNB into 4-chloronitrosobenzene and 4-chloroaniline intermediates, which were then suffered from the subsequent oxidative ring-opening by ·OH generated from the reaction between Fe(II) and H2O2. By controlling the addition time of H2O2, the final mineralization rate of p-CNB reached 6.6 × 10-1 h-1, about 74 times that of oxidation alone (9.0 × 10-3 h-1). More importantly, this controllable ROC process was also applicable for the site remediation of CNBs contaminated soil by either ex-situ treatment or in-situ injection, and, respectively decreased the concentrations of p-CNB, m-CNB, and o-CNB from 1105, 980, and 94 mg/kg to 3, 1, and < 1mg/kg, meeting the remediation goals (p-CNB: < 32.35 mg/kg, o-CNB and m-CNB: < 1.98 mg/kg). These laboratory and field trial results reveal that this controllable ROC strategy is very promising for the treatment of electron-withdrawing groups substituted aromatic contaminates.

Removal of antibiotic thiamphenicol by bacterium Aeromonas hydrophila HS01.

Thiamphenicol (TAP) is an amphenicol antibiotic, which has a broad-spectrum inhibitory effect on both gram-positive and gram-negative bacteria. Since it is widely used in animals and aquaculture, its residues in environment may bring potential risk for human health and ecosystems. While TAP can be removed through conventional physical or chemical methods, its bioremediation using microorganisms is less studied. Here, we report the removal of TAP by a bacterial strain, Aeromonas hydrophila HS01, which can remove more than 90.0% of TAP in a living cell-dependent manner. Our results indicated that its removal efficiency can be greatly affected by the growth condition. Proteomics studies revealed a number of differentially expressed proteins of HS01 in the presence of TAP, which may play critical roles in the transportation and degradation of TAP. All these results indicate bacterial strain A. hydrophila HS01 is a new microbial resource for efficiently removing TAP, and may shed new insights in developing bioremediation approaches for TAP pollution.

Efficient removal of PFOA with an In2O3/persulfate system under solar light via the combined process of surface radicals and photogenerated holes.

The environmental persistence, high toxicity and wide spread presence of perfluorooctanoic acid (PFOA) in aquatic environment urgently necessitate the development of advanced technologies to eliminate PFOA. Here, the simultaneous application of a heterogeneous In2O3 photocatalyst and homogeneous persulfate oxidation (In2O3/PS) was demonstrated for PFOA degradation under solar light irradiation. The synergistic effect of direct hole oxidation and in-situ generated radicals, especially surface radicals, was found to contribute significantly to PFOA defluorination. Fourier infrared transform (FTIR) spectroscopy, Raman, electrochemical scanning microscope (SECM) tests and density functional theory (DFT) calculation showed that the pre-adsorption of PFOA and PS onto In2O3 surface were dramatically critical steps, which could efficiently facilitate the direct hole oxidation of PFOA, and boost PS activation to yield high surface-confined radicals, thus prompting PFOA degradation. Response surface methodology (RSM) was applied to regulate the operation parameters for PFOA defluorination. Outstanding PFOA decomposition (98.6%) and near-stoichiometric equivalents of fluorides release were achieved within illumination 10 h. An underlying mechanism for PFOA destruction was proposed via a stepwise losing CF2 unit. The In2O3/PS remediation system under solar light provides an economical, sustainable and environmentally friendly approach for complete mineralization of PFOA, displaying a promising potential for treatment of PFOA-containing water.

Structural dependent Cr(VI) adsorption and reduction of biochar: hydrochar versus pyrochar.

Hydrochar and pyrochar are two typical biochars, and possess different intrinsic structures and chemical properties as well as pollutant removal abilities. However, their structural dependent pollutant removal performances and the related mechanisms are far less studied. In this study, we systematically compared the Cr(VI) removal processes of hydrochar and pyrochar in dark and under simulated sunlight at pH 5.7 ± 0.1, aiming to clarify the structural dependent Cr(VI) removal of biochar. In dark, hydrochar could remove 19.0% of Cr(VI) only via adsorption within 8 h, less than that (23.5%) of pyrochar via both adsorption and indirect solution •O2- reduction pathway. Although simulated sunlight irradiation could significantly promote the Cr(VI) reduction performances of both hydrochar and pyrochar, the Cr(VI) reduction percentage (88.1%) of hydrochar via both direct surface electron reduction and indirect solution •O2- reduction pathways, was much higher than that (30.2%) of pyrochar only via indirect solution •O2- reduction pathway. This different Cr(VI) reduction pathway of hydrochar and pyrochar was arisen from their structural dependent Cr(VI) adsorption models, as revealed by ATR-FTIR characterization and DFT calculation. More phenolic -OH group on hydrochar surface provided abundant sites for Cr(VI) chemical adsorption to form a strong inner-sphere complex, favoring the interfacial electron transfer for the direct surface Cr(VI) reduction. In contrast, more micropores in pyrochar were responsible for the Cr(VI) physical adsorption via intra-particle and boundary layer diffusion, which hampered the surface Cr(VI) direct reduction because of the weak interfacial interaction between Cr(VI) and pyrochar. This study clarifies the influence of surface structure on the Cr(VI) adsorption and reduction pathways of biochar, and also provides an efficient Cr(VI) removal strategy with sunlight and hydrochar.

Kirkendall Effect Boosts Phosphorylated nZVI for Efficient Heavy Metal Wastewater Treatment.

Removal of non-biodegradable heavy metals has been the top priority in wastewater treatment and the development of green technologies remains a significant challenge. We demonstrate that phosphorylated nanoscale zero-valent iron (nZVI) is promising for removal of heavy metals (NiII , CuII , CrVI , HgII ) via a boosted Kirkendall effect. Phosphorylation confines tensile hoop stress on the nZVI particles and "breaks" the structurally dense spherical nZVI to produce numerous radial nanocracks. Exemplified by NiII removal, the radial nanocracks favor the facile inward diffusion of NiII and the rapid outward transport of electrons and ferrous ions through the oxide shell for surface (NiII /electron) and boundary (NiII /Fe0 ) galvanic exchange. Accompanied by a pronounced hollowing phenomenon, phosphorylated nZVI can instantly reduce and immobilize NiII throughout the oxide shell with a high capacity (258 mg Ni g-1 Fe). For real electroplating factory wastewater treatment, this novel nZVI performs simultaneous NiII and CuII removal, producing effluent of stable quality that meets local discharge regulations.

Surface structure-dependent photocatalytic O2 activation for pollutant removal with bismuth oxyhalides.

The purification of water and air by semiconductor photocatalysis is a rapidly growing area for academic research and industrial innovation, featured with ambient removal of organic or inorganic pollutants by using solar light as the energy source and atmospheric O2 as the green oxidant. Both charge transfer and energy transfer from excited photocatalysts can overcome the spin-forbidden nature of O2. Layered bismuth oxyhalides are a new group of two-dimensional photocatalysts with an appealing geometric and surface structure that allows the dynamic and selective tuning of O2 activation at the surface molecular level. In this Feature Article, we specifically summarize our recent progress in selective O2 activation by engineering surface structures of bismuth oxyhalides. Then, we demonstrate selective photocatalytic O2 activation of bismuth oxyhalides for environmental control, including water decontamination, volatile organic compound oxidation and nitrogen oxide removal, as well as selective catalytic oxidations. Challenges and opportunities regarding the design of photocatalysts with satisfactory performance for potential environmental control applications are also presented.

Hydrogen Spillover to Oxygen Vacancy of TiO2-xHy/Fe: Breaking the Scaling Relationship of Ammonia Synthesis.

Optimizing kinetic barriers of ammonia synthesis to reduce the energy intensity has recently attracted significant research interest. The motivation for the research is to discover means by which activation barriers of N2 dissociation and NHz (z = 1-2, surface intermediates) destabilization can be reduced simultaneously, that is, breaking the "scaling relationship". However, by far only a single success has been reported in 2016 based on the discovery of a strong-weak N-bonding pair: transition metals (nitrides)-LiH. Described herein is a second example that is counterintuitively founded upon a strong-strong N-bonding pair unveiled in a bifunctional nanoscale catalyst TiO2-xHy/Fe (where 0.02 ≤ x ≤ 0.03 and 0 < y < 0.03), in which hydrogen spillover (H) from Fe to cascade oxygen vacancies (OV-OV) results in the trapped form of OV-H on the TiO2-xHy component. The Fe component thus enables facile activation of N2, while the OV-H in TiO2-xHy hydrogenates the N or NHz to NH3 easily.